Detailed Review Of Raise3D Pro2 Plus 3D Printer
The Raise3D Pro2 Plus is one of the few professional
- info@thinkfab.in
- +91-8142896564
Specialty Resins features advanced materials with unique mechanical properties that expand what’s possible with in-house fabrication on our stereolithography 3D printers. These materials may require additional steps, equipment, and experimentation.
Specialty Resins features advanced materials with unique mechanical properties that expand what’s possible with in-house fabrication on our stereolithography 3D printers. These materials may require additional steps, equipment, and experimentation. we have sub category resins such as HighTemp Resin, Ceramic Resin, Rebound Resin
High Temp Resin offers a heat deflection temperature (HDT) of 238 °C 0.45 MPa.it is used to print detailed, precise prototypes with high temperature resistance.Hot air, gas, and fluid flow Heat resistant mounts, housings, fixtures, Molds and inserts .
Parts 3D printed in silica-filled Ceramic Resin can be fired to create a fully ceramic piece. ceramic resin offers Technical experimentation Fine art, sculpture R &D and Jewelry
Rebound Resin has five times the tear strength, three times the tensile strength, and two times the elongation of other production-grade elastomeric materials on the market, Rebound Resin is perfect for 3D printing springy, resilient parts.
| high Temperature | Ceramic | Rebound | |
|---|---|---|---|
| Tensile Strength | 58 MPa | N/A | 22MPa |
| Tensile modulus | 2.8 GPa | 5.1GPa | - |
| Elongation Break | 3.3% | - | 300% |
| Flexural modulus | 2.6 GPa | - | - |
| Notched Izod | 18 J/m | - | - |
| heat deflection @1.8MPa | 78˚C | 75˚C | - |
| heat deflection @0.4MPa | 120˚C | 290˚C | - |
Brochure
Brochure
The Raise3D Pro2 Plus is one of the few professional
Raise 3D Pro-3 Plus is a revised and upgraded version
Nozzle clogging is one major issue with FDM 3D Printers.
Filaments are a vital part of additive manufacturing. It is
3D Printer nozzle is one of the most important components
Fused Deposition Modeling (FDM), or Fused Filament Fabrication (FFF), is
3rd Floor, PBN Square, Opp. Croma
Above IndusInd Bank, Rd No: 36
Jubilee Hills, Hyderabad
Telangana – 500033
Email: info@thinkfab.in
Ph: +91-81428 96564
